Publications

Books

Madenci, E. Barut, A. and Dorduncu, M., 2019, Peridynamic Differential Operators for Numerical Analysis, Springer, Boston, MA.

Madenci, E. and Oterkus. E., 2014, Peridynamic Theory and Its Applications, Springer, Boston, MA (Chinese translation-Shanghai Jiao Tong University Press)

Madenci, E. and Guven, I., 2015, The Finite Element Method and Applications in Engineering Using ANSYS, Springer, Boston, MA. (2nd Edition).

Madenci, E., Guven, I. and Kilic, B., 2002, Fatigue Life Prediction of Solder Joints in Electronic Packages with ANSYS, Kluwer Academic Publishers, Boston, MA.

 

Book Chapters

Madenci, E., Barut, A. and Dorduncu, M. 2018, “Peridynamics for Numerical Analysis,” Advances in Computers and Information in Engineering Research, Volume 2, Edited by J. Michopoulos, D. Rosen, C. Paredis, J. Vance. ASME Press. (In-press)

Madenci, E., Oterkus, S., 2016, “Peridynamics for Coupled Field Equations,” The Handbook of Peridynamics, Edited by F. Bobaru, J.T. Foster, P. Guebelle, S.A. Silling. Taylor & Francis/CRC Press.

Madenci, E., Oterkus, E., 2016, “Peridynamic modeling of fiber reinforced composites,” The Handbook of Peridynamics, Edited by F. Bobaru, J.T. Foster, P. Guebelle, S.A. Silling. Taylor & Francis/CRC Press.

Oterkus, E.,Diyaroglu, Zhu, N., Oterkus, S., and Madenci, E., 2015, “Utilization of Peridynamic Theory at the Nano-Scale,” Nanopackaging: From Nanomaterials to the Atomic Scale, Edited by X. Baillin, C. Joachim and G. Poupan, Springer Inter. Publish., Switzerland.

Madenci, E., Barut, A. and Guven, I., 2011, “Stress Analysis of Composite Joints under Multiaxial Loading,” Composite joints and connections: Principles, modeling and testing, Edited by P. Camanho and L. Tong, Woodhead Publishing, Cambridge, UK.

Madenci, E., Barut, A. and Guven, I., 2011, “Stress Analysis of Bonded Patch and Scarf Repairs in Composite Structures,” Composite joints and connections: Principles, modelling and testing, Edited by P. Camanho and L. Tong, Woodhead Publishing, Cambridge, UK.

Lamson, M, Cangellaris, A. and Madenci, E. 2007, “Integrated Circuit Packaging,” Handbook of Semiconductor Manufacturing Technology, Edited by R. Doering and Y. Nishi, CRC press, Boca Raton, FL.

 

Refereed Articles

126 Madenci, E., Dorduncu, M., and Gu, X., 2019, “Peridynamic least squares minimization,” Computer Methods in Applied Mechanics and Engineering Vol. 348, pp. 846-874

125 Dorduncu, M., Madenci, E., Barut, A. and Phan, N., 2018, “A state-based peridynamic analysis in a finite element framework,” Engineering Fracture Mechanics, Vol. 195, pp. 104-128.

124 Madenci, E., Dorduncu, M., Barut, A. and Phan, N., 2018, “Weak form of peridynamics for nonlocal essential and natural boundary conditions,” Computer Methods in Applied Mechanics and Engineering, Vol. 337, pp. 598-631.

123 Hu, Y. L., H. Chen, B. Spencer, and Madenci, E., 2018, “Thermomechanical peridynamic analysis with non-uniform discretization,” Engineering Fracture Mechanics, Vol. 197, pages 92-113.

122 Madenci, E., Barut, A. and Phan, N., 2017, “Peridynamic unit cell homogenization for thermoelastic properties of heterogenous microstructures with defects,” Composite Structures, Vol. 188, pp. 104-115.

121 Gu, X., Madenci, E. and Zhang, Q., 2018, “Revisit of non-ordinary state-based peridynamics,” Engineering Fracture Mechanics, Vol. 190, pp. 31-52.

120 Diyaroglu, C., Oterkus, S., Oterkus, E., Madenci, E., 2017, “Peridynamic Modeling of Diffusion by Using Finite Element Analysis,” IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 7, pp. 1823-1831.

119 Madenci, E., Barut, A., Dorduncu, M. and Futch, M., 2017, “Numerical solution of linear and nonlinear partial differential equations by using the peridynamic differential operator,” Numerical Methods for Partial Differential Equations, Vol. 33, pp. 1726–1753

118 Hu, Y. and Madenci, E., 2017, “Peridynamics for Predicting Damage and its Growth in Composites,” Fatigue & Fracture of Engineering Materials & Structures, Vol. 40, pp. 1214–1226

117 Madenci, E., 2017, “Peridynamic integrals for strain invariants of homogeneous deformation,” Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 97, pp. 1236-1251.

116 Oterkus, S., Madenci, E. and Oterkus, E., 2017, “Fully Coupled Poroelastic Peridynamic Formulation for Fluid-Filled Fractures,” Engineering Geology, Vol. 225, pp. 19-28.

115 Madenci, E. and Oterkus, S., 2017, “Ordinary state-based peridynamics for thermoviscoelastic deformation,” Engineering Fracture Mechanics, Vol. 175, pp. 31–45.

114 Oterkus, S. and Madenci, E., 2017, “Peridynamic modeling of fuel pellet cracking,” Engineering Fracture Mechanics, Vol. 176, pp. 23–37

113 Diyaroglu, C., Oterkus, S., Oterkus, E., Madenci, E., Han, S., and Hwang, Y., 2017, “Peridynamic wetness approach for moisture concentration analysis in electronic packages,” Microelectronic Reliability, Vol. 70,  pp. 103 -111

112 Bang, D. J. and Madenci, E., 2017, “Peridynamic modeling of hyperelastic membrane deformation,” ASME Journal of Engineering Materials and Technology, Vol. 139, 031007.

111 Madenci, E., Colavito, K., and Phan, N., 2016, “Peridynamics for unguided crack growth prediction under mixed-mode loading,” Engineering Fracture Mechanics, Vol. 167, pp. 34–44

110 Hu, Y. L. and Madenci, E., 2017, “Peridynamics for fatigue life and residual strength prediction of composite laminates,” Composite Structures, Vol. 160, pp. 169-184.

109 Hu, Y. L. and Madenci, E.2016, “Bond-based peridynamic modeling of composite laminates with arbitrary fiber orientation and stacking sequence,” Composite Structures, Vol. 153, pp. 139-175.

108 Diyaroglu, C., Oterkus, E., Madenci, E., Rabczuk, T. and Siddiq, A., 2016, “Peridynamic modeling of composite laminates under explosive loading,” Composite Structures, Vol. 144, pp. 14–23.

107 Madenci, E., Barut, A., and Futch, M., 2016, “Peridynamic Differential Operator and its Applications,” Computer Methods in Applied Mechanics and EngineeringVol. 304, pp. 408–451

106 Madenci, E. and Oterkus, S., 2016, “Ordinary State-Based Peridynamics for Plastic Deformation According to von Mises Yield Criteria with Isotropic Hardening,” J. of the Mechanics and Physics of Solids, Vol. 86, pp. 192–219.

105 Hu, Y., De Carvalho, N.V. and Madenci, E., 2015, “Peridynamic modeling of delamination growth in composite laminates,” Composite Structures, Vol. 132, pp. 610–620.

104 Oterkus, S. and Madenci, E., 2015, “Peridynamics for anti-plane shear and torsional deformations,” J. of Mechanics of Materials and Structures, Vol. 10, pp. 167–193

103 Diyaroglu, C., Oterkus, E., Oterkus, S. and Madenci, E., 2015, “Peridynamics for bending of beams and plates with transverse shear deformation,” Int. J. of Solids and Structures, Vol. 69–70, pp. 152–168.

102 Oterkus, S., Madenci, E. and Agwai, A., “Peridynamic Thermal Diffusion,”2014, J. of Computational Physics, Vol. 265, pp. 71–96.

101 Oterkus, S., Madenci, E. and Agwai, A., 2014, “Fully Coupled Peridynamic Thermomechanics,” Journal of the Mechanics and Physics of SolidsVol. 64, pp. 1-23.

100 Barut, A., Madenci, E. and Tessler, A.  2013, “C0-continuous Triangular Plate Element for Laminated Composite and Sandwich Plates Using the {2,2} - Refined Zigzag Theory,” Composite Structures, Vol. 106, pp. 835 - 853.

99 Oterkus, E., Guven, I. and Madenci, E., 2012, “Impact Damage Assessment by Using Peridynamic Theory,” Central European J. of Engineering, Vol. 2, pp. 523-531

98 Oterkus, E. and Madenci, E., 2012, “Peridynamic Theory for Damage Initiation and Growth in Composite Laminate,” Key Engineering Materials, Vol. 488-489, pp. 355-358.

97 Agwai, A. Guven, I. and Madenci, E., 2012, “Drop-Shock Failure Prediction in Electronic Packages by Using Peridynamic Theory,” IEEE Trans. on Components, Packaging and Manufacturing Technology, Vol. 2, pp. 439-447.

96 Oterkus, E. and Madenci, E., 2012, “Peridynamic Analysis of Fiber Reinforced Composite Materials,” J. of Mechanics of Materials and Structures, Vol. 7, pp. 45-84.

95 Oterkus, E., Madenci, E., Weckner, O., Silling, S., Bogert, P. and Tessler, A., 2012, “Combined finite element and peridynamic analyses for predicting failure in a stiffened composite curved panel with a central slot,” Composite Structures, Vol. 94, pp. 839-850.

94 Barut, A., Madenci, E. and Nemeth, M., 2011, “Stress and Buckling Analyses of Laminates with a Cutout Using a {3,0}- Plate Theory” J. of Mechanics of Materials and Structures, Vol. 6, pp. 827–868.

93 Agwai, A. Guven, I. and Madenci, E., 2011, “Crack Propagation in Multilayer Thin-film Structures of Electronic Packages Using Peridynamic Theory,” Microelectronics Reliability, Vol. 51, pp. 2298-2305..

92 Agwai, A. Guven, I. and Madenci, E., 2011, “Predicting Crack Propagation with Peridynamics: A Comparative Study,” Int. J. of Fracture, Vol. 171, pp. 65-78.

91 Celik, E., Guven, I. and Madenci, E., 2011, “Simulations of nanowire bend tests for extracting mechanical properties,” Theoretical and Applied Fracture Mechanics, Vol. 55, pp. 185-191

90 Celik, E., Guven, I. and Madenci, E., 2011, “Mechanical characterization of nickel nanowires by using a customized atomic force microscope,” J. of Nanotechnology, Vol. 22, DOI: 10.1088/0957-4484/22/15/155702.

89 Kilic, B., and Madenci, E., 2010, “Coupling of Peridynamic Theory and Finite Element Method,” J. of Mechanics of Materials and Structures, Vol. 5, pp. 707–733.

88 Barut, A. and Madenci, E., 2010, “A Complex Potential-Variational Formulation for Thermo-Mechanical Buckling Analysis of Flat Laminates with an Elliptic Cutout,” Composite Structures, Vol. 92, pp. 2871-2884.

87 Kilic, B., and Madenci, E., 2010, “An Adaptive Dynamic Relaxation Method for Quasi-static Simulations using the peridynamic theory,” Theoretical and Applied Fracture Mechanics, Vol. 53, pp. 194-201..

86 Kilic, B., and Madenci, E., 2010, “Peridynamic Theory for Thermomechanical Analysis,” IEEE Transactions on Advanced Packaging, Vol. 33, pp. 97-105.

85 Kilic, B., and Madenci, E., 2009, “Structural Stability and Failure Analysis Using Peridynamic Theory,” Int. J. of Non-Linear Mechanics, Vol. 44, pp. 845-854.

84 Celik, E., Guven, I., and Madenci, E., 2009, “Experimental and Numerical Characterization of Non-Fickian Moisture Diffusion in Electronic Packages,” IEEE Transactions on Advanced Packaging, Vol. 32, pp. 666-674.

83 Kilic, B., and Madenci, E., “Prediction of Crack Paths in a Quenched Glass Plate by Using Peridynamic Theory,” Int. J. of Fracture, Vol. 156, 2009, pp. 165-177.

82 Das, M., Barut, A., and Madenci, E., 2009, “Analysis of Multibody Systems Experiencing Large Elastic Deformations,” Multibody System Dynamics, DOI 10.1007/s11044-009-9168-0.

81 Kilic, B., Agwai, A. and Madenci, E., 2009, “Peridynamic Theory for Progressive Damage Prediction in Centre-Cracked Composite Laminates” Composite Structures, Vol. 90, pp. 141-151.

80 Das, M., Madenci, E., and Ambur, D. R., 2009, “Three-dimensional nonlinear analyses of scarf repair in composite laminates and sandwich panels,” J. of Mechanics of Materials and Structures, Vol. 3, pp. 1641-1658.

79 Das, M., Oterkus, E., Madenci, E., and Razi, H., 2009, “Residual strength of sandwich panels with hail damage” Composite Structures, Vol. 88, pp. 403-412.

78 Barut, A., and Madenci, E., 2009, “Analysis of bolted–bonded composite single-lap joints under combined in-plane and transverse loading” Composite Structures, Vol. 88, pp 579-594.

77 Poore, A. L., Barut, A., and Madenci, E., 2008, “Free vibration of laminated cylindrical shells with a circular cutout,” J. of Sound and Vibration, Vol. 312, pp. 55-73.

76 Gordnian, K., Hadavinia, H., Mason, P., and Madenci, E., 2008, “Determination of Fracture Energy and Cohesive Strength in Mode I Delamination of Angle-Ply Laminated Composites” Composite Structures, Vol. 82, pp. 577-586.

75 Oterkus, E., Madenci, E. and Nemeth. M. P., 2007, “Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout,” J. of Mechanics of Materials and Structures, Vol. 2, pp. 695-751.

74 Kilic, B. and Madenci, E., 2007, “Hypersingular Integral Equations for the Solution of Penny-shaped Interface Cracks,” J. of Mechanics of Materials and Structures, Vol. 2, pp. 729-752.

73 Kradinov, V., Madenci, E. and Ambur, D. R., 2007, “Combined in-plane and through-the thickness analysis for failure prediction of bolted composite joints,” Composite Structures, Vol. 77, pp. 127-147.

72 Kradinov, V., Madenci, E., and Ambur, D. R., 2007, “Application of Genetic Algorithm for Optimum Design of Bolted Composite Lap Joints,” Composite Structures, Vol. 77, pp. 148-159.

71 Das, M., Barut, A., Madenci, E., and Ambur, D.R., 2006, “A Triangular Plate Element for Thermo-elastic Analysis of Sandwich Panels with a Functionally Graded Core” Int. J. for Numerical Methods in Eng., Vol. 68, pp. 940-966.

70 Barut, A., Guven, I. and Madenci, E., 2006, “A Meshless Grain Element for Micromechanical Analysis with Crystal Plasticity,” Int. J. for Numerical Methods in Engineering, Vol. 67, pp. 17-65.

69 Das, M., Guven, I. and Madenci, E., 2006, “Coupled BEM and FEM Analysis of Functionally Graded Material Layers,” J. of Thermal Stresses, Vol. 29, pp. 263-287.

68 Kilic, B., Madenci, E. and Ambur, D. R., 2006, “Influence of Adhesive Spew in Bonded Single-Lap Joints,” Engineering Fracture Mechanics, Vol. 73, pp. 1472-1490.

67 Kay, N. R., Ghosh, S., Guven, I. and Madenci, E., 2006, “A Combined Experimental and Analytical Approach for Interface Fracture Parameters between Dissimilar Materials in Electronic Packages,” J. of Materials Science and Engineering A, Vol. 421, pp. 57-67.

66 Oterkus, E., Barut, A., Madenci, E., Smeltzer III, S.S. and Ambur, D. R., 2006, “Bonded Lap Joints of Composite Laminates with Tapered Edges,” Int. J. of Solids and Structures, Vol. 43, pp. 1459-1489.

65 Kilic, B., Madenci, E. and Mahajan, R., 2006, “Energy Release Rate and Crack Surface Contact Zone by Hyper-singular Integral Equations,” Int. J. of Solids and Structures, Vol. 43, pp. 1159-1188.

64 Oterkus, E., Barut, A., Madenci, E. and Ambur, D. R., 2005, “Nonlinear Analysis of a Composite Panel with a Cutout Repaired by a Bonded Tapered Composite Patch,” Int. J. of Solids and Structures, Vol. 42, pp. 5274-5306.

63 Das, M., Barut, A., Madenci, E. and Ambur, D.R., 2005, “Complete Stress Field in Sandwich Panels with a New Triangular Finite Element of Single-Layer Theory,” Computer Methods in Applied Mechanics and Engineering, Vol. 194, pp. 2969-3005.

62 Kradinov, V., Madenci, E. and Ambur, D. R., 2005, “Bolted Lap Joints of Laminates with Varying Thickness and Metallic Inserts,” Composite Structures, Vol. 68, pp. 75-85.

61 Guven, I., Kradinov, V., Madenci, E., and Tor, J.L., 2004, “Solder Joint Life Prediction Model Based on the Strain Energy Density Criterion,” ASME J. of Electronic Packages, Vol. 126, pp.1-8.

60 Barut, A. and Madenci, E., 2004, “Thermo-mechanical Stress Analysis of Laminates with a Cutout by a Complex Potential-Variational Method,” J. of Thermal Stresses, Vol. 27, pp. 1-31.

59 Mahajan, R., Erdogan, F., Kilic, B., and Madenci, E, 2003, “Cracking of an Orthotropic Substrate Reinforced by an Orthotropic Plate,” Int. J. of Solids and Structures, Vol. 40, pp 6389-6415

58 Guven, I., Madenci, E and Chan, C. L., 2003, “Transient Two-Dimensional Heat Conduction Analysis of Electronic Packages by Coupled Boundary and Finite Element Methods,” IEEE Transactions on Components and Packaging Technologies, Vol. 25, pp. 684-694.

57 Guven, I., Madenci, E., 2003, "Thermoelastic Stress Field in a Piecewise Homogeneous Domain under Non-uniform Temperature Using a Coupled Boundary and Finite Element Method," Int. J. for Numerical Methods in Engineering, Vol. 56, pp. 381-403.

56 Guven, I., Madenci, E., 2003, "Transient Heat Conduction Analysis in a Piecewise Homogeneous Domain by  a Coupled Boundary and Finite Element Method," Int. J. for Numerical Methods in Engineering, Vol. 56, pp. 351-380.

55 Barut, A., Madenci, E., Anderson, T., and Tessler, A., 2002, “Equivalent Single-Layer Theory for a Complete Stress Field in Sandwich Panels under Arbitrarily Distributed Loading,” Composite Structures, Vol. 58, pp. 483-495.

54 Kradinov, V., Hanauska, J., Barut, A., Madenci, E., and Ambur, D. R., 2002, “Bolted Patch Repair of Composite Panels with a Cutout,” Composite Structures, Vol. 56, pp. 423-444.

53 Descour, M. R., Karkkainen, A.H.O., Rogers, J. D., Liang, C., Kilic, B., Madenci, E., Rantala, T. J., Richards-Kortum, R. R., Anslyn, E. V., and Dupuis, R.,D., 2002, “Towards the Development of Miniaturized Imaging Systems for Detection of Pre-Cancer,” IEEE J. of Quantum Electronics, Vol. 38, pp. 122-130.

52 Barut, A., Hanauska, J., Madenci, E., and  Ambur, D. R., 2002, “Analysis Method for Bonded Patch Repair of a Skin with a Cutout,” Composite Structures, Vol. 55, pp. 277-294.

51 Kay, N., Barut, A., and Madenci, E., 2002, “Singular Stresses in a Finite Region of Two Dissimilar Viscoelastic Materials with Traction-Free Edges,” Computer Methods in Applied Mechanics and Eng., Vol. 191, pp. 1221-1244.

50 Barut, A., Guven, I., and Madenci, E., 2001, “Analysis of Singular Stress Fields at Junctions of Multiple Dissimilar Materials Under Mechanical and Thermal Loading,” Int. J. of Solids and Structures, Vol. 38, pp. 9077-9109.

49 Kradinov, V., Barut, A., Madenci, E., and Ambur, A. R., 2001, “Bolted Double-Lap Composite Joints Under Mechanical and Thermal Loading,” Int. J. of Solids and Structures, Vol. 38, pp. 7801-7837.

48 Hanauska, J., Kradinov, V., and Madenci, E., 2001, “A Composite Double-Lap Joint with Staggered Bolts: An Experimental and Analytical Investigation,” Composite Structures, Vol. 54, pp. 3-15.

47 Madenci, E., Barut, A., and Nemeth, M. P., 2001, “A Complex Potential-Variational Method for Stress Analysis of Unsymmetric Laminates with an Inclined Cutout,” ASME J. of Applied Mechanics, Vol. 68, pp.731-739.

46 Barut, A., Madenci, E., Heinrich, J, and Tessler, A., 2001, “Analysis of Thick Sandwich Construction by a {3,2}-Order Theory,” Int. J. of Solids and Structures, Vol. 38, pp. 6063-6077.

45 Shkarayev, S., Madenci, E., Ibnabdeljalil, M., and Savruk, M. P., 2001, “Analytical Stress Singularities for a Crack at a Bi- or Triple Junction of Dissimilar Materials with Bilinear Behavior,” Eng. Fracture Mech., Vol. 68, pp. 475-486.

44 Sburlati, R., Madenci, E., and Guven, I., 2000, “Local Buckling of a Circular Interface Between a Layer and  a Substrate with Finite Thickness,” ASME J. of Applied Mechanics, Vol. 67, pp.590-596.

43 Anderson, T. and Madenci, E., 2000, “Experimental Investigation of Low-Velocity Impact Characteristics of Sandwich Composites,” Composite Structures, Vol. 50, pp. 239-247.

42 Anderson, T. and Madenci, E., 2000, “Graphite/Epoxy Foam Sandwich Panels Under Quasi-Static Indentation,” Engineering Fracture Mechanics, Vol. 67, pp. 327-342.

41 Anderson, T., Guven, I., Madenci, E., and Gustafsson, G., 2000, “The Necessity of Reexamining Previous Life Prediction Analyses of Solder Joints in Electronic Packages,” IEEE Transactions on Components and Manufacturing Technology, Part B: Advanced Packaging, Vol. 23, pp.516-520.

40 Barut, A., Madenci, E., Tessler, A., and Starnes, J. H., Jr., 2000, “A New Stiffened Shell Element for Geometrically Nonlinear Analysis of Composite Laminates,” Computers and Structures, Vol. 77, pp. 11-40.

39 Barut, A., Madenci, E., and Tessler, A., 2000, “Nonlinear Thermoelastic Analysis of Composite Panels Under Non-Uniform Temperature Distribution,” Int. J. of Solids and Structures, Vol. 37, pp. 3681-3713.

38 Sergeev, B., Madenci, E., and Ambur, D. R., 2000, “Influence of Bolt Spacing and Degree of Laminate Anisotropy in Single-Lap Joints,” Computers and Structures, Vol. 76, pp. 89-103.

37 Razi, H., Sergeev, B., Shkarayev, S., and Madenci, E., 1999, “Analysis of Sandwich Panels with Multiple-Site Damage,” Engineering Fracture Mechanics, Vol. 64, pp. 255-268.

36 Savruk, M. P., Shkarayev, S., and Madenci, E., 1999, “Stress Near Apex of Dissimilar Materials with Bilinear Behavior,” Theoretical and Applied Fracture Mechanics, Vol. 31, pp. 203-212.

35 Guven, I., Chan, C. L., and Madenci, E., 1999, “Transient Thermal Analysis of Electronic Packages by Boundary Element Method,” IEEE Transactions on Components and Manufacturing Technology, Part B: Advanced Packaging, Vol. 22, pp. 476-486.

34 Sergeev, B., Madenci, E., and Ambur, D. R., 1999, “Stress Intensity Factors for an Arbitrarily Oriented Crack Near a Hole in a Longeron Web,” Theoretical and Applied Fracture Mechanics, Vol. 31, pp. 213-222.

33 Savruk, M. P., Madenci, E., and Shkarayev, S., 1999, “Singular Integral Equations of the Second Kind with Generalized Cauchy-Type  Kernels and Variable Coefficients,” Int. J. of Numerical Methods in Engineering, Vol. 45, pp. 1457-1470.

32 Madenci, E., Shkarayev, S., and Sergeev, B., 1998, “Boundary Collocation Method for Multiple Defect Interactions in an Anisotropic Finite Region,” Int. J. of Fracture, Vol. 94, pp. 339-355.

31 Balkan, H. and Madenci, E., 1998, “Thermal Loading of a Thin Layer with Circular Debonding Over a Substrate,” Int. J. of Fracture, Vol. 91, pp. 217-231.

30 Madenci, E., Shkarayev, S., and Mahajan, R., 1998, “Potential Failure Sites in a Flip-Chip Package With or Without Underfill,” ASME J. of Electronic Packages, Vol. 120, pp. 336-341.

29 Madenci, E., Shkarayev, S., and Sergeev, B., 1998, “Thermo-Mechanical Stresses for a Triple Junction of Dissimilar Materials: Global-Local Finite Element Analysis,” Theoretical and Applied Fracture Mech., Vol. 30, pp. 103-117.

28 Persson, E., Madenci, E., and Eriksson, I., 1998, “Delamination Initiation of Laminates with Pin-Loaded Holes,” Theoretical and Applied Fracture Mechanics, Vol. 30, pp. 87-101.

27 Persson, E. and Madenci, E., 1998, “Composite Laminates with Elliptical Pin-Loaded Holes,” Engineering Fracture Mechanics, Vol. 61, pp. 279-295.

26 Madenci, E., Shkarayev, S., Sergeev, B., Oplinger, D. W., and Shyprykevich, P., 1998, “Analysis of Composite Laminates with Multiple Fasteners, Int. J. of Solids and Structures, Vol. 35, pp. 1793-1811.

25 Anderson, T., Madenci, E., Burton, W. S., and Fish, J. C., 1998, “Analytical Solution of Finite-Geometry Composite Panels Under Transient Surface Loading,” Int. J. of Solids and Structures, Vol. 35, pp. 1219-1239.

24 Kabir, H., Madenci, E., and Ortega, A., 1998, “Numerical Solution of Integral Equations with Logarithmic, Cauchy and Hadamard Type Singularities,” Int. J. for Numerical Methods in Engineering, Vol. 41, pp. 617-638.

23 Barut, A., Madenci, E., Britt, V. O., and Starnes, J. H., Jr., 1997, “Buckling of a Thin Tension-Loaded Composite Plate with an Inclined Crack,” Engineering Fracture Mechanics, Vol. 58, pp. 233-248.

22 Barut, A., Madenci, E., and Tessler, A., 1997, “Nonlinear Analysis of Laminates Through a Mindlin-Type Shear Deformable Shallow Shell Element,” Computer Methods in Applied Mechanics and Eng., Vol. 143, pp. 155-173.

21 Barut, A., Madenci, E., and Tessler, A., 1996, “Nonlinear Elastic Deformations of Moderately Thick Laminated Shells Subjected to Large and Rapid Rigid-Body Motion,” Finite Elem. in Analysis and Design, Vol. 22, pp. 41-57.

20 Madenci, E. and Barut, A., 1996, “Dynamic Response of Thin Composite Shells Experiencing Nonlinear Elastic Deformations and Large Overall Motions,” Int. J. for Numerical Methods in Engineering, Vol. 39, pp. 2695-2723.

19 Madenci, E., Balkan, H., and Quan, M., 1995, “Biaxial Compression of a Thin Layer with Circular Debonding Over a Substrate,” Int. J. of Solids and Structures, Vol. 32, pp. 3465-3477.

18 Madenci, E., Ileri, L., and Starnes, J., 1995, “Analysis of a Pin‑Loaded Hole in Composite Laminates Under Combined Bearing‑Bypass and Shear Loading,” Int. J. of Solids and Structures, Vol. 32, pp. 2053-2062.

17 Madenci, E. and Barut, A., 1994, “A Free‑Formulation‑Based Flat Shell Element for Nonlinear Analysis of Thin Composite Structures,” Int. J. for Numerical Methods in Engineering, Vol. 37, pp. 3825-3842.

16 Madenci, E. and Barut, A., 1994, “Thermal Postbuckling Analysis of Cylindrically Curved Composite Laminates with a Hole,” Int. J. for Numerical Methods in Engineering, Vol. 37, pp. 2073-2091.

15 Madenci, E. and Barut, A., 1994, “Pre‑ and Postbuckling Response of Curved, Thin Composite Panels with Cutouts Under Compression,” Int. J. for Numerical Methods in Engineering, Vol. 37, pp. 1499-1510.

14 Madenci, E. and Westmann, R. A., 1993, “Local Delamination Growth in Layered Systems Under Compressive Load,” ASME J. of Applied Mechanics, Vol. 60, pp. 895-902.

13 Madenci, E. and Ileri, L., 1993, “An Arbitrarily Oriented, Rigid, Elliptic Inclusion in a Finite Anisotropic Medium,” Int. J. of Fracture, Vol. 62, pp. 341-354.

12 Madenci, E. and Ileri, L., 1993, “Analytical Determination of Contact Stresses in Mechanically Fastened Composite Laminates with Finite Boundaries,” Int. J. of Solids and Structures, Vol. 30, pp. 2469‑2484.

11 Madenci, E., Ileri, L., and Kudva, J. N., 1993, “Analysis of Finite Composite Laminates with Holes,” Int. J. of Solids and Structures, Vol. 30, pp. 825-834.

10 Madenci, E. and Ileri, L., 1993, “Modified Mapping‑Collocation Method Revisited,” Engineering Fracture Mechanics, Vol. 44, pp. 127-136.

9 Madenci, E. and Klemm, W., 1992, “Compression‑Induced Failure of a Glassy Material with a Crack‑Like Defect,” Engineering Fracture Mechanics, Vol. 41, pp. 443-452.

8 Madenci, E., 1991, “Slightly Open, Penny‑Shaped Crack in an Infinite Solid Under Biaxial Compression,” Theoretical and Applied Fracture Mechanics, Vol. 16, pp. 215-222.

7 Madenci, E., 1991, “Delamination Growth and Buckling in an Orthotropic Strip,” Int. J. of Solids and Structures, Vol. 27, pp. 1773-1788.

6 Madenci, E. and Westmann, R. A., 1991, “Local Delamination Buckling in Layered Systems,” ASME J. of Applied Mechanics, Vol. 58, pp. 157-166.

5 Sih, G. and Madenci, E., 1985, “Prediction of Failure in Weldments—Part II: Joint with Initial Notch and Crack,” Theoretical and Applied Fracture Mechanics, Vol. 3, pp. 31-40.

Sih, G. and Madenci, E., 1985, “Prediction of Failure in Weldments—Part I: Smooth Joint,” Theoretical and Applied Fracture Mechanics, Vol. 3, pp. 23-29.

Sih, G. and Madenci, E., 1983, “Discussion on ‘A Further Examination on the Application of the Strain Energy Density Theory to the Angled Crack Problem’,” ASME J. of Applied Mechanics, Vol. 50, pp. 234-236.

2 Sih, G. and Madenci, E., 1983, “Crack Growth Resistance Characterized by the Strain Energy Density Function,” Engineering Fracture Mechanics, Vol. 18, pp. 1159-1171.

1 Sih, G. and Madenci, E., 1983, “Crack Initiation under Gross Yielding: Strain Energy Density Function,” Engineering Fracture Mechanics, Vol. 18, pp. 667-677.

 

Conference Articles

138 Madenci, E., Barut, A., Dorduncu, M. and Phan, N., 2018, “Weak form of peridynamics,” 59th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, paper No. AIAA-2018-1223.

137 Madenci, E., Barut, A., Dorduncu, M. and Phan, N., 2018, “Coupling of peridynamics with finite elements without an overlap zone,” 59th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, paper No. AIAA-2018-1462.

136 Madenci, E., Diyaroglu, C. and Phan, N., 2018, “ANSYS implementation of peridynamics for deformation of orthotropic materials,” 59th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, paper No. AIAA-2018-1463.

135 Madenci, E., Kefal, A., Dorduncu, M., Barut, A., and Yildiz, M. 2018, “Isogeometric analysis using peridynamics and XFEM,” 59th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, paper No. AIAA-2018-1464.

134 Diyaroglu, C., Madenci, E., Oterkus, S. and Oterkus, E., 2017, “Peridynamic Solution of Wetness Equation with Time Dependent Saturated Concentration in ANSYS Framework” 67th Electronic Components & Technology Conference, Orlando, FL.

133 Madenci, E. Hu, Y. and Phan, N., 2017, Peridynamic Modeling of Cracking in Ceramic Matrix Composites, 17th International Conference on New Trends in Fatigue and Fracture (NT2F17), Cancun, Mexico.

132 Madenci, E. Barut, A. and Phan, N., 2017, “Peridynamic Unit Cell Homogenization,” 58th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Grapevine, Texas, paper No. AIAA-2017-1138.

131 Dorduncu, M., Barut, A., Madenci, E. and Phan, N, 2017, “Peridynamic Augmented XFEM,” 58th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Grapevine, Texas, paper No. AIAA-2017-0656.

130 Hu, Y. and Madenci, E., 2017, “Peridynamic Modeling of Fatigue Damage in Notched Composite Laminates,” 58th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Grapevine, Texas, paper No. AIAA 2017-1140. Best student paper award.

129 Madenci, E. and Oterkus, S., 2017, “Peridynamic Modeling of Thermo Oxidative Damage Evolution in a Composite Lamina,” 58th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Grapevine, Texas, paper No. AIAA-2017-0197.

128 Han, S. W., Diyaroglu, C., Oterkus, S., Madenci, E.Oterkus, E., Hwang, Y., Seol, H., 2016, “Peridynamic Direct Concentration Approach by Using ANSYS”66th Electronic Components & Technology Conference, Las Vegas, NV.

127 Hu, Y. and Madenci, E., 2016, “Bond-Based Peridynamics with an Arbitrary Poisson’s Ratio,” 57th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, California, paper No. AIAA 2016-1722.

126 Hu, Y., Madenci, E. and Phan, N., 2016, “Peridynamics for Predicting Tensile and Compressive Strength of Notched Composites,” 57th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, California, paper No. No. AIAA-2016-1723.

125 Dorduncu, M., Barut, A. and Madenci, E., 2016, “Peridynamic Truss Element for Viscoelastic Deformation,” 57th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, California, paper No. AIAA-2015-1721.

124 Madenci, E. Barut, A. and Phan, N., 2015, “Damage Prediction Due to Simultaneous Multiple Impacts in Composites Using Peridynamics,” 20th International Conference on Composite Materials, Copenhagen, Denmark, Paper No. 3305-1.

123 Madenci, E. Colavito, K. and Phan, N., 2015, “Unguided Crack Path Prediction by Using Peridynamics,” The 5th International Conference on Crack Paths (CP 2015), Ferrara, Italy, Paper No. 039.

122 Madenci, E. Barut, A. and Phan, N., 2015, “Multi-Body Peridynamics for Failure Prediction in Rotating Thick Composites,” AHS 71st American Helicopter Society International Annual Forum, Virginia Beach, Virginia, pp. 2425-2431.

121 Madenci, E., Guven, I. and Phan, N., 2015, “Peridynamics for Crack Initiation and Propagation under Cyclic Loading,” Proceedings of the 34th Conference and the 28th Symposium of the International Committee on Aeronautical Fatigue and Structural Integrity, Helsinki, Finland, ICAF 2015 Structural Integrity: Embracing the future – respecting the past; supporting aging fleets with new technologies, Edited by Aslak Siljander, pp. 304-315.

120 Han, S., Lim, S., Hwang, Y., Bae, J., Lee, S., Oterkus, E., Diyaroglu, C., Madenci, E., Oterkus, S., 2015, “The Equivalent Acceleration Assessment of JEDEC Moisture Sensitivity Levels Using Peridynamics”65rd Electronic Components & Technology Conference, San Diego, CA.

119 Dorduncu, M., Barut, A., and Madenci, E., 2015, “Ordinary-State Based Peridynamic Truss Element,” 56th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, Florida., paper No. AIAA-2015-0465

118 Hu, Y., Madenci, E. and Phan, N., 2015, “Peridynamic Modeling of Defects in Composites,” 56th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, Florida, paper No. No. AIAA-2015-1875.

117 Dorduncu, M., Barut, A., Madenci, E. and Tessler, A., 2015, “A Refined Zigzag Element for Modeling Sandwich Construction with Embedded Stiffeners,” 56th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Kissimmee, Florida, paper No. AIAA-2015-2072.

116 Oterkus, S., Madenci, E., Oterkus, E., Hwang, Y., Bae, J. and Han, S., 2014, “Hygro-Thermo-Mechanical Analysis and Failure Prediction in Electronic Packages by Using Peridynamics,”64rd Electronic Components & Technology Conference, Orlando, FL, pp. 973-982

115 Barut, A., Madenci, E. and Phan, N., 2014, “Damage Prediction in Composites due to Compression after Impact by Using Peridynamics,” 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, National Harbor, Maryland, Paper No. AIAA 2014-1525

114 Barut, A., Madenci, E. and Tessler, A., 2014, “Post-buckling Response of Scarf Repaired Laminates Using a Refined Zigzag Element,” 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, National Harbor, Maryland, Paper No. AIAA 2014-0847.

113 Oterkus, S. and Madenci, E., 2014, “Peridynamics for Fully Coupled Thermomechanical Analysis of Fiber Reinforced Laminates,” 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, National Harbor, Maryland, Paper No. AIAA 2014-0694

112 Kilic, B., Barut, A., and Madenci, E.,“ Post Assembly Warpage Prediction Using a Refined Zigzag Element,” 63rd Electronic Components & Technology Conference, Las Vegas, NV.

111 Madenci, E., Alpay, S., and Fox, J., 2013,“Simulation of Electromigration through Peridynamics,” 63rd Electronic Components & Technology Conference, Las Vegas, NV, pp. 1488-1493.

110 Madenci, E., Barut, B. and Phan, N., 2013, “Progressive Failure Prediction in Composite Laminates with a Hole by Using Peridynamic Theory,” Proc. of the 27th Symposium on the Int. Committee on Aeronautical Fatigue and Structural Integrity, Edited by Abraham Brot, The Israel Society of Aeronautics and Astronautics, Jerusalem, Israel, pp. 915-923.

109 Madenci, E., Guven, I. and Phan, N., 2013, “Fatigue Crack Propagation by Using Peridynamic Theory,” Proc. of the 27th Symposium on the Int. Committee on Aeronautical Fatigue and Structural Integrity, Edited by Abraham Brot, The Israel Society of Aeronautics and Astronautics, Jerusalem, Israel, pp. 261-269.

108 Colavito, K, Barut, A., Madenci, E. and Phan, N., 2013, “Residual Strength of Composite Laminates with a Hole  by Using Peridynamic Theory,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, Massachusetts, Paper No. AIAA-2013-1761

107 Barut, A., Madenci, E. and Tessler, A., 2013, “Prediction of Composite Laminate Strength Properties Using a Refined Zigzag Plate Element,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, Massachusetts, Paper No. AIAA-2013-1539

106 Alpay, S. and Madenci, E., 2013, “Crack Growth Prediction in Fully-Coupled Thermal and Deformation Fields Using Peridynamic Theory,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference Boston, Massachusetts, Paper No. AIAA-2013-1477

105 Dorduncu, M, Atila Barut, A. and Madenci, E., 2013, “Failure Prediction in Sandwich Panels under Blast Loading Using a Refined Zigzag Element,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Boston, Massachusetts, Paper No. AIAA-2013-1551

104 Agwai, A. Guven, I., and Madenci, E., 2012, “Failure Prediction in Fully Coupled Thermal and Deformational Fields with Peridynamic” 62nd Electronic Components & Technology Conference, San Diego, CA.

103 Barut, A., Madenci, E. and Tessler, A., 2012, “A Refined Zigzag Theory for Laminated Composite and Sandwich Plates Incorporating Thickness Stretch Deformation” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Paper No. AIAA-2012-1705

102 Colavito, K., Guven, I. and Madenci, E., 2012, “Fracture Behavior of Nanostructured Materials through Peridynamic Theory,’ 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Paper No. AIAA-2012-1542.

101 Oterkus, E., Barut, A. and Madenci, E., 2012, “Peridynamics Based on the Principle of Virtual Work,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Paper No. AIAA-2012-1540

100 Oterkus, E. and Madenci, E., 2012, “Peridynamics for Failure Prediction in Composites,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Paper No. AIAA-2012-1692

99 Oterkus, E. and Madenci, E., 2012, “Ordinary State-Based Peridynamic Material Constants,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Paper No. AIAA-2012-1946

98 Agwai, A., Guven, I. and Madenci, E., 2012, “Fully Coupled Peridynamic Thermomechanics,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, Paper No. AIAA-2012-1963

97 Barut, A., and Madenci, E., 2011, “An Analytical Method for Evaluating Repairs of in Composite Honeycomb

Structures,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, Paper No. AIAA-2011-1789.

96 Barut, A., Guven, I. and Madenci, E., 2011, “An Analytical Method for Evaluating Bolted Joint Repairs in Composite Structures,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, Paper No. AIAA-2011-1733.

95 Oterkus, E., and Madenci, E., 2011, “Damage Prediction in Graphene Thermoplastics for Potential Electronic Packaging Applications,” 61st Electronic Components & Technology Conference, Orlando, Florida.

94 Celik, E., Guven, I., and Madenci, E., 2011, “Mechanical Characterization of Nanowires Using a Customized Atomic Force Microscope in Scanning Electron Microscope,” 61st Electronic Components & Technology Conference, Orlando, Florida.

93 Agwai, A., Guven, I., and Madenci, E., 2011, “A New Thermomechanical Fracture Analysis Approach for 3D Integration Technology,” 61st Electronic Components & Technology Conference, Orlando, Florida.

92 Celik, E., Guven, I., and Madenci, E., 2011, “Mechanical Characterization of Nanowires Using a Customized Atomic Force Microscope,” Conference Proceedings of the Society for Experimental Mechanics Series , In: Proulx T. (eds) Experimental and Applied Mechanics, Volume 6. pp. 117-126, Springer, New York, NY

91 Vallone, W., Guven, I. and Madenci, E., 2010, “Wind Tunnel Tests to Modify a Drag-type Vertical Axis Wind Turbine” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2653.

90 Oterkus, E., Guven, I. and Madenci, E., 2010, “Effect of Core Termination Features on Failure Modes in Sandwich Panels by Using Peridynamic Theory” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2691.

89 Oterkus, E., Barut, A. and Madenci, E., 2010, “Damage Growth Prediction from Loaded Composite Fastener Holes by Using Peridynamic Theory” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-3026.

88 Colavito, K. W. and Madenci, E., 2010, “Adhesive failure in hybrid double cantilever beams by digital image correlation” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2603.

87 Alpay, S., Barut, A. and Madenci, E., 2010, “An efficient modeling approach for dynamic simulation of wind turbine blades” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2739.

86 Alpay, S., Barut, A., Madenci, E. and Tessler, A., 2010, “A Robust Three-node Shell Element Using Consistent In-plane and Transverse Bending Kinematics for Analysis of Stiffened-Shell Structures” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2929.

85 Agwai, A., Guven, I. and Madenci, E., 2010, “Comparison of XFEM, CZM and PD for Predicting Crack Initiation and Propagation” 51th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, Paper No.2010-2539. – Best student paper award.

84 Oterkus, E, Guven, I. and Madenci, E., 2010, “Fatigue Failure Model with Peridynamic Theory” Proceedings of ITherm 2010, Las Vegas, NV.

83 Agwai, A., Guven, I. and Madenci, E., 2010, “Predicting Crack Initiation and Propagation using XFEM, CZM and Peridynamics: A Comparative Study” 60th Electronic Components & Technology Conference, Las Vegas, NV.

80 Oterkus, E, Agwai, A., Guven, I. and Madenci, E., 2009, “Peridynamic Theory for Simulation of Failure Mechanisms in Electronic Packages” Proceedings of InterPACK'09, San Francisco, CA, Paper No. IPACK2009-89107.

79 Celik, E., Oterkus, E., Guven, I., and Madenci, E., 2009, "Mechanical Characterization of Ultra-thin Films by Combining AFM Nanoindentation Tests and Peridynamic Simulations," 59th Electronic Components & Technology Conference, San Diego, CA.

78 Agwai, A., Guven, I., and Madenci, E., 2009, "Damage Prediction for Electronic Package Drop Test using Finite Element Method and Peridynamic Theory," 59th Electronic Components & Technology Conference, San Diego, CA.

77 Das, M., Barut, A. and Madenci, E., 2009, “A Refined and Efficient Approach for Dynamic Analysis of Helicopter Blades,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2603.

76 Das, M., Barut, A., Madenci, E. and Tessler, A., 2009, “Folded Plate Structures Undergoing Large Membrane and Transverse Bending Deformations,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2344.

75 Kilic, B. and Madenci, E., 2009, “Coupling of Peridynamic Theory and Finite Element Method,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2395.

74 Barut, A. and Madenci, E., 2009, “Progressive Damage in Composite Laminates Using a Higher Order Element,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2548.

73 Colavito, K.W., Madenci, E., and Smeltzer III, S.S., 2009, “Refinements in Digital Image Correlation Technique to Extract Adhesive Strains Lap Joints,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, Paper No.2009-2504.

72 Colavito, K.W., Das, M., Hahs, D., Gorman, J., Madenci, E., and Smeltzer III, S.S., 2008, “Digital Image Correlation for Adhesive Strains in Bonded Composite Lap Joints,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-1844.

71 Barut, A., and Madenci, E., 2008, “Postbuckling of Composite Panels with Isogrid Stiffeners,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-2274.

70 Barut, A., Das, M., Madenci, E., and Tessler, A., 2008, “A Geometrically Nonlinear Shell Element Based on Higher-Order Theory for Sandwich Panels,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-2254.

69 Kilic, B., Agwai, A., and Madenci, E., 2008, “Damage Prediction in Notched Composites Using the Peridynamic Theory,” 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, Paper No.2008-2000.

68 Agwai, A., Guven, I., and Madenci, E., 2008, "Peridynamic Teory for Failure Prediction in Multilayer Thin-Film Structures of Electronic Packages," 58th Electronic Components & Technology Conference, Lake Buena Vista, FL.  INTEL Best student paper award.

67 Agwai, A., Guven, I., and Madenci, E., 2008, "Peridynamic Theory for Impact Damage Prediction and Propagation in Electronic Pckages due to Drop," 58th Electronic Components & Technology Conference, Lake Buena Vista, FL.

66 Celik, E., Guven, I., and Madenci, E., 2007, "Experimental and Numerical Characterization of Non-Fickian Moisture Diffusion in Electronic Packages ," 57th Electronic Components & Technology Conference, Reno, NV.

65 Turkmen, H. S., Dogan, V. Z., Madenci, E. and Tessler, A., 2007, “Vibration of Sandwich Panels Using {3,2}-Order Plate Theory,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2382.

64 Agwai, A., Guven, I., Madenci, E. and Kepler, J., 2007, “A Combined Experimental and Numerical Analysis of Sandwich Panels Subjected to Ballistic Loads,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-1998.

63 Das, M., Madenci, E. and Straub, F., 2007, “Aeroelastic Analysis of Rotor Blades Using Three Dimensional Flexible Multibody Dynamic Analysis,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2295.

62 Oterkus, E., Barut, A., Madenci, E. and Ambur, D. R., 2007, “Analysis of Bolted-Bonded Composite Lap Joints,” ,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2187.

61 Colavito, K. W., Kilic, B., Celik, E., Madenci, E., Askari, E. and Silling, S., 2007, “Effect of Nano Particles on Stiffness and Impact Strength of Composites ,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2021.

60 Colavito, K. W., Kilic, B., Celik, E., Madenci, E., Askari, E. and Silling, S., 2007, “Effect of Void Content on Stiffness and Strength of Composites by a Peridynamic Analysis and Static Indentation Test,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, Paper No. 2007-2251.

59 Celik, E., Guven, I. and Madenci, E. “Non-Fickian Moisture Diffusion in Electronic Packages: Experimental and Computational Aspects,” TECHCON 2007, Austin, Texas, September 10-12, 2007.

58 Kilic, B. and Madenci, E., “Peridynamic Theory to Predict Strain Field in Bonded Dissimilar Material Layers Due to Thermal Loading,” Int. Congress on Thermal Stresses, Taipei, Taiwan, June 4-7, 2007.

57 Celik, E., Guven, I. and Madenci, E., 2006, “Transient Response of Composite Sandwich Panels Subjected to Blast Wave Pressure,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-2008.

56 Kilic, B., Madenci, E. and Ambur, D. R., 2006, “Analysis of Brazed Single-Lap Joints by Peridynamics Theory,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-2267.

55 Das. M., Barut, A., Madenci, E., and Straub, F. K., 2006, “Nonlinear Flexible Multibody Dynamic Analysis of Rotor Blades with a Trailing Edge Flap,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1862.

54 Oterkus, E., Madenci, E., Smeltzer III, S.S. and  Ambur, D. R., 2006, “Thermo-Mechanical Analysis of Bonded Cylindrically Curved Composite Shell Structures,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1963.

53 Oterkus, E., Madenci, E. and Ambur, D. R., 2006, “Validated Analysis Method for Bolted Composite Lap Joints,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-2270.

52 Barut, A., Das, M. and Madenci, E., 2006, “Nonlinear Deformations of Flapping Wings on a Micro Air Vehicle,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1662.

51 Barut, A. and Madenci, E., 2006, “A Semi-Analytical Approach for Predicting the Post-Buckling Response of Composite Plates with a Cutout,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1786.

50 Barut, A. and Madenci, E., 2006, “Buckling Analysis of Laminates with a Cutout through Zeroth-Order Shear Deformation Theory,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, New Port, Rhode Island, Paper No. 2006-1785.

49 Das, M., Madenci, E. and Razi, H., 2005, “Repair Classification for Sandwich Panels with Hail Damage," Seventh Int. Conference on Sandwich Structure, Aalborg, Denmark, pp. 497-506.

48 Das, M., Guven, I. and Madenci, E., 2005, "Simulation of Functionally Graded Underfill Layers Using the Boundary Element Method," 55th Electronic Components & Technology Conference, Lake Buena Vista, FL.

47 Oterkus, E., Madenci, E., and Nemeth, M. P., 2005, “Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-1824.

46 Barut, A., Guven, I., Madenci, E. and Ambur, D. R., 2005, “A Meshless Grain Element for Micromechanical Analysis,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-1910.

45 Oterkus, E., Madenci, E., Smeltzer III, S.S. and  Ambur, D. R., 2005, “Nonlinear Analysis of Bonded Composite Tubular Lap Joints,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-2380.

44 Kilic, B. and Madenci, E., 2005, “Analysis of Blister Tests by Using Hypersingular Integral Equations,” 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Austin, Texas, Paper No. 2005-2323.

43 Avila, A. F. and Madenci, E., 2004, “An Experimental Investigation of  Negative Through-the-Thickness Poisson’s Ratio on Patch Repairs,” ASC/ASTM-D30 Joint 19th Annual Technical Conference, Atlanta, GA, October 17-20.

42 Kirk, J. J., Tor, J. L., Guven, I., Madenci, E., Mertol, A. and Kutlu, Z., 2004, "Experimental Validation of Hygro/Thermo-Mechanical Simulations for Multi-Material Polymer Structures," 54th Electronic Components & Technology Conference, Las Vegas, NV.

41 Kay, N. R., Ghosh, S., Guven, I. and Madenci, E., 2004, “A Combined Experimental and Analytical Approach for Interface Fracture Parameters between Dissimilar Materials in Electronic Packages,” TMS Annual Meeting, Charlotte, NC, March 14-18.

40 Das, M., Guven, I. and Madenci, E., 2004, “Three-dimensional analysis of sandwich panels with common defects ,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1840.

39 Oterkus, E., Barut, A. and Madenci, E., 2004, “Buckling of composite plates with a reinforced circular cutout subjected to uniform and non-uniform compression ,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1714.

38 Das, M., Barut, A., Madenci, E. and  Ambur, D. R., 2004, “Thermo-elastic triangular sandwich element for the complete stress field based on a single-layer theory ,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1770.

37 Oterkus, E., Barut, A., Madenci, E., Smeltzer III, S.S. and  Ambur, D. R., 2004, “Nonlinear analysis of bonded composite single-lap joints,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1560.

36 Kradinov, V., Madenci, E. and  Ambur, D. R., 2004, “Combined in-plane and through-the thickness analysis for failure prediction of bolted composite joints,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1703.

35 Kilic, B., Madenci, E. and  Ambur, D. R., 2004, “Global-Local Finite Element Analysis of Bonded Single-Lap Joints,” 45rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, Paper No. 2004-1559.

34 Guven, I., Kradinov, V., Madenci, E., and Tor, J., 2003, "Solder Joint Life Prediction Model Based on the Strain Energy Density Criterion," 53rd Electronic Components & Technology Conference, New Orleans, LA, pp.214-220.

33 Kilic, B., Madenci, E. and  Ambur, D. R., 2003, “Three-Dimensional Analytical Solution of Functionally Gradient Core Sandwich Panels with a Circular Hole," Sixth Int. Conf. on Sandwich Const., Boca Raton, Florida, pp.  260-269.

32 Das, M., Barut, A., Madenci, E. and  Ambur, D. R., 2003, “A Triangular Sandwich Element for Complete Stress Field Based on a Single-Layer Theory," Sixth Int. Conf. on Sandwich Const., Boca Raton, Florida, pp. 879-894.

31 Guven, I. and Madenci, E., 2003, “Singular Stress Field for an Elliptical Surface Crack Perpendicular to the Interface of Dissimilar Materials by Boundary Element Method,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2003-1993.

30 Madenci, E. and Barut, A., 2003, “Influence of an Elliptical Cutout on Buckling Response of Composite Cylindrical Shells with Non-uniform Wall-Thickness and Non-Circular Cross-Section,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2003-1929.

29 Das, M., Barut, A., Madenci, E. and  Ambur, D. R., 2003, “Nonlinear Analysis of a Tapered Patch Bonded over a Cutout in a Skin,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2003-1999.

28 Kradinov, V., Madenci, E. and  Ambur, D. R., 2003, “Analysis of Bolted Laminates of Varying Thickness and Lay-Up with Metalic Inserts ,” 44rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Norfolk, Virginia, Paper No. 2002-1998.

27 Barut, A., and Madenci, E., 2002, “The Influence of Uncertainties on the Buckling Response of Thin Curved Composite Panels with Multiple Cutouts,” 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, Paper No. 2002-1515.

26 Anderson, T., Hanauska, J. and Madenci, E., 2001, “Embedded PVF2 Sensors for Impact and Damage Detection in Sandwich Composites,” 33rd Int. SAMPE Technical Conference, Seattle, Washington, pp. 129-139.

25 Guven, I., Barut, A., and Madenci, E., 2001, “Sensitivity Derivatives in Dissimilar Material Junctions in Electronic Packages,” 51st Electronic Components and Technology Conference, Orlando, Florida, pp. 911-918.

24 Anderson, T. and Madenci, E., 2001, “Simplified Dynamic Low-Velocity Impact Models for Sandwich Composites Based on Complete Quasi-Static Analyses,” 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, Paper No. 2001-1543.

23 Kradinov, V., Barut, A., Madenci, E., and Ambur, D. R., 2001, “Optimum Design for Double-Lap Bolted Composite Joints Using a Genetic Algorithm,” 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, Paper No. 2001-1490.

22 Barut, A. and Madenci, E., 2001, “A Complex Potential-Variational Formulation for Buckling Analysis of Flat Laminates with Multiple Cutouts,” 42nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Seattle, Washington, Paper No. 2001-1547.

21 Barut, A., Madenci, E., and Tessler, A., 2000, “Complete Stress Field in Thick Sandwich Construction via Single Layer Theory," Fifth Int. Conference on Sandwich Construction, Zurich, Switzerland, pp. 691-704.

20 Gustafsson, G., Guven, I., Kradinov, V., and Madenci, E., 2000, “Finite Element Modeling of BGA Packages for Life prediction,” 50th Electronic Components and Technology Conference, Las Vegas, Nevada, pp. 1059-1063.

19 Anderson, T., Barut, A., Guven, I., and Madenci, E., 2000, “Revisit of Life Prediction Models for Solder Joints,” 50th Electronic Components and Technology Conference, Las Vegas, Nevada, pp. 1064-1069.

18 Barut, A., Madenci, E., Heinrich, J, and Tessler, A., 1999, “Analysis of Thick Sandwich Construction by a {3,2}-Order Theory," European Conference on Computational Mechanics, Munich, Germany.

17 Anderson, T., Guven, I., Madenci, E., and Gustafsson, G., 1999, “The Necessity of Reexamining Previous Life Prediction Analyses of Solder Joints in Electronic Packages,” 49th Electronic Components and Technology Conference, San Diego, California, pp. 1010-1014.

16 Kay, N., Madenci, E., and Shkarayev, S., 1999, “Global/Local Finite Element Analysis for Singular Stress Fields Near the Junction of Dissimilar Elastic and Elastic-Plastic Materials in Electronic Packages,” 49th Electronic Components and Technology Conference, San Diego, California, pp. 987-993.

15 Madenci, E., Shkarayev, S., Shipilov, Y., and Scotti, S., 1999, “Analysis of Double-Lap Composite Joints with Multiple-Row Bolts Under Combined Mechanical and Thermal Loading,” Int. Conference on Joining and Repair of Plastics and Composites, The Institution of Mechanical Engineers, London, England, pp. 55-64, 1999.

14 Sergeev, B., Madenci, E., and Ambur, D. R., 1998, “Influence of Bolt Spacing and Degree of Laminate Anisotropy in Single-Lap Joints,” NATO-ASI on Mechanics of Composite Materials and Structures, Troia, Portugal.

13 Barut, A., Madenci, E., and Tessler, A., 1998, “Analysis of Composite Sandwich Panels via a Triangular Shell Element Based on Higher-Order Theory,” Fourth Int. Conference on Sandwich Construction, Stockholm Sweden, EMAS Publishing, West Midlands, UK, pp. 263-278.

12 Anderson, T., Madenci, E., and Fish, J. C., 1998, “An Analytical and Experimental Investigation of Sandwich Composites Subjected to Low-Velocity Impact,” Fourth Int. Conference on Sandwich Construction, Stockholm Sweden, EMAS Publishing, West Midlands, UK, pp. 731-744.

11 Razi, H., Sergeev B., Shkarayev, S., and Madenci, E., 1998, “Analysis of Sandwich Panels with Multiple-Site Damage,” Fourth Int. Conference on Sandwich Construction, Stockholm Sweden, EMAS Publishing, West Midlands, UK, pp. 213-216.

10 Guven, I., Madenci, E., and Chan, C.-L., 1998, “Transient Heat Conduction Analysis of Electronic Packages by Coupled Boundary and Finite Element Methods,” 48th Electronic Components and Technology Conference, Seattle, Washington, pp. 51-61.

9 Madenci, E., Shkarayev, S., and Mahajan, R., 1997, “Potential Failure Sites in a Flip-Chip Package With or Without Underfill,” ASME Int. Congress and Exposition, Symposium on Application of Fracture Mechanics in Electronic Packaging, Dallas, Texas.

8 Guven, I., Chan, C.-L., and Madenci, E., 1997, “Transient Thermal Analysis of Electronic Packages by Boundary Element Method,” 47th Electronic Components and Technology Conference, San Jose, California, pp. 279-288.

7 Denham, H., Anderson, T., Madenci, E., and Calvert, P., 1997, “Embedded PVF2 Sensors for Smart Composites,” Proceedings of SPIE, Vol. 3040, pp. 138-147, 1997.

6 Barut, A., Madenci, E., and Tessler, A., 1997, “Nonlinear Analysis of Moderately Thick Laminates Subjected to Non-Uniform Temperature,” Fourth US National Congress on Computational Mechanics, San Francisco, California.

5 Barut, A., Madenci, E., Starnes, J. H., Jr., and Tessler, A., 1997, “Stiffened Curved Panels with an Inclined Crack Under Tension,” Fourth US National Congress on Computational Mechanics, San Francisco, California.

4 Ozen, M., Madenci, E., Yu, L., and Mahajan, R., 1996, “Fracture Mechanics Analysis of Electronic Packages,” 7th Int. ANSYS Conference and Exhibition, Pittsburgh, PA, Vol. 3, pp. 425-432.

Madenci, E., Shkarayev, S., Sergeev, B., Oplinger, D. W., and Shyprykevich, P., 1996, “Analysis of Composite Laminates with Multiple Fasteners,” 11th DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, Fort Worth, Texas, Vol. 1, pp. VII1.15-53.

Ileri, L. and Madenci, E., 1995, “Crack Initiation and Growth in Electronic Packages,” 45th Electronic Components and Technology Conference, Las Vegas, Nevada, pp. 970-975.

Mahajan, R., Madenci, E., Ileri, L., and Thurston, M., 1995, “Stress Concentrations in Electronic Packaging,” Material Research Society Symposium Proceedings, San Francisco, California, Vol. 390, pp. 39-48.